Example configuration file – GAI-Tronics VoIP Telephone Software Configuration Guide User Manual
Page 68
GAI-TRONICS
VoIP Telephone Configuration Guide
Page 68 of 88
8.
Example Configuration File
The file below is an example with at least one entry in every possible section.
The key features of the phone are:
• 2 button handsfree with an emergency button (dials 888) and an information button (dials
three alternative end points in cascade).
• Output 1 activates a beacon when the unit is making or receiving a call.
• Output 2 activates a door release on command from another telephone
• Call tones are set to UK patterns
• Alarms 2, 3, 4 & 8 report via SYSLOG
• Alarm 6 (stuck button) reports via email
• Input 1 is configured as a vandal alarm and also reports via email
[ACCESS]
USERNAME=newuser
//User name changed
PASSWORD=newpassword //Password
changed
[ALARMS]
ALARM1=REPORT NONE
ALARM2=REPORT ON
ALARM2=ONTIME 0
ALARM2=OFFTIME 0
ALARM2=SYSLOG ON
ALARM2=MAIL OFF
ALARM2=MSG "Config Error"
ALARM3=REPORT ON
ALARM3=ONTIME 0
ALARM3=OFFTIME 0
ALARM3=SYSLOG ON
ALARM3=MAIL OFF
ALARM3=MSG "Cold Reset"
ALARM4=REPORT ON
ALARM4=ONTIME 0
ALARM4=OFFTIME 0
ALARM4=SYSLOG ON
ALARM4=MAIL OFF
ALARM4=MSG "Warm Reset"
ALARM6=REPORT ON
ALARM6=ONTIME 10
ALARM6=OFFTIME 2
ALARM6=SYSLOG OFF
ALARM6=MAIL ON
ALARM6=MSG "Stuck button"
ALARM8=REPORT ON
ALARM8=ONTIME 360
ALARM8=OFFTIME 0
ALARM8=SYSLOG ON
ALARM8=MAIL OFF
ALARM8=MSG "Registration Fail"
[AUDIO]
CODEC=5,6,4,3,1,2
DTMF=RFC2833
FRAMES=G711 20
FRAMES=G722 20
FRAMES=G729 2
FRAMES=G7231 1
HANDSFREEGAIN=3
HANDSFREEVOLUME=3
JITTERMAX=60
JITTERMIN=30
3XE
D