IHSE USA R434-91 Series SDLink Rackmount Hubs - Manual (Page 51)

Appendix B: Rack Mount Options 49
SDBR1 Mounting Kit
SDBR1 allows you to mount one of the following Local Units across 1U:
• SDBX/S1
• SDBX/SA1
• SDBX/D1
• SDBX/DA1
The kit consists of two angled brackets.
To mount a unit:
1. Remove the two screws from one side of the unit.
2. Match up the lower pair of holes on a bracket with the vacant screw holes
on the side of the unit.
3. Using the original screws, fasten the mounting brackets to the side of the
unit.
4. Repeat this procedure on the other side of the unit.
5. Fasten the assembly to the rack unit.
Figure 20 SDBR1 Mounting Kit