MBM Corporation 49 - Manual (Page 11)

T10114 Jan 2001
Sheet Feeder Model 49 Operator Manual
3. Operator Instructions
3.1 Setting up the Model 49
When transporting the Model 49 the document table should
be flipped down. Flip up the document table, release the
securing plate on both sides of the document table by
holding the document table down a little bit when pushing
them away. The document table is now in its working
position.
Open the docking plate on Model 45 and position the Model
49 to the Model 45. Lock the Model 49 to the Model 45. If a
Model 306/310 is present in the system it should be posi-
tioned whith Model 49, square with the document table and
as close to the document table as possible. While calibrat-
ing the collator, adjust the paper deflector so that the leading
edge of the sheets lands between the insert feed belts on
the Model 45.
Mailer/inserter Model 45
Booklet feeder Model 46
Feeder Model 306/310
Model 49 docking plate
3-1
Sheet feeder Model 49