MBM Corporation 49 - Manual (Page 7)

T10114 Jan 2001
Sheet Feeder Model 49 Operator Manual
The ”Run Mode Menu” is displayed when the Model 49 is
started. In the ”Run Mode Menu” there are three options:
”STOP”, ”PAUSE” and ”ADJUST”. Scroll / select option with
the arrow buttons and confirm with the OK button.
”STOP”: The Model 49 (and attached units) completes the
already started set and then stops. You will be returned to
the ”Main Menu”.
”PAUSE”: The model 49 (and attached units) is paused
immediately. The text ”PAUSE” will be replaced with the text
”CONTINUE”. Select ”CONTINUE” and confirm with the OK
button when you want to leave the pause mode and start the
system. Or, select ”STOP” and confirm with the OK button
when you want to leave the pause mode and stop the sys-
tem.
”ADJUST”: The “Run Mode Option Menus” can be reached
both when the Model 49 is paused and while it is running. In
the “Run Mode Option” menu there are three options: “SETS
PER HOUR”, “CLEAR COUNTER” and “PRESET COUN-
TER”. Scroll/select option with the arrow buttons and confirm
with the OK button.
“SETS PER HOUR”: To adjust speed use the arrow buttons.
The range is 1000 to 3600 sets per hour. Default value is
1800. The speed will, however, be limited to match units
attached.
“CLEAR COUNTER”: Clears the set counter when the OK
button is pressed.
“PRESET COUNTER”: To set the preset counter use the arrow
buttons. Default value is 0. This menu can also be used to
check the setting of the preset counter and the number of sets
to go before the job is completed.
NOTE: When checking, use the “ESC” button to leave the menu
without changing the settings.
2.4 Explanation of the Menus, cont.
Run Mode Menu
Pause Mode Menu
STOP 00075
PAUSE
PAUSE
ADJUST
STOP 00075
CONTINUE
Clear Counter
00075
Counter :00100
Remaining :00025
SPH: 2800
Adjustment Menu
Adjustment Menu
Adjustment Menu
2-4