MBM Corporation 49 - Manual (Page 16)

T10114 Jan 2001
Sheet Feeder Model 49 Operator Manual
3.3 Loading, cont.
Slide the document side guides away from each other. Read
the scale on the bottom of the document board, and set the
same width as the loaded inserts.
3-6
When feeding longedge the short paper deflector should be
placed on the edge of the cover, and the long paper
deflector should hang down on the document table. When
feeding short edge, the short paper deflector should be
placed in the hole at the top of the cover, and the long paper
deflector should also be placed in the same hole.
scale