MBM Corporation 49 - Manual (Page 9)

T10114 Jan 2001
Sheet Feeder Model 49 Operator Manual 2-6
The menu “JOB SETUP” contains the main group of
settings.
Enter the length of the inserts (in the feed direction) using the
arrow buttons. The range is 100 to 310 mm. Default value is
200 mm.
Enter the number of sets per hour using the arrow buttons.
The range is 1000 to 3600 sets per hour. Default value is
1800. The speed will however be limited to match units
attached. When running the machine do not adjust speed
more than 1000 SPH at a time, If so, it could cause inter-
ruption per set.
Enter the number of sheets that should be fed from the
Model 49 per set using the arrow buttons. The range is 1 to
50 sheets per set. Defalut value is 1.
Enter OMR by pressing the OK button. Select OMR On or
Off.
See page (8.1) more for information .
The menu “Advanced Setup” contains settings of Belt
speed, Lug Speed, Eject Speed and Trig Delay.
PRESET COUNTER
JOB SETUP
LENGTH
SETS PER HOUR
Length: 210mm
SETS PER HOUR
SHEETS/SET
SPH: 2800%
SHEETS/SET
OMR
BS: 100%
OMR
ADVANCED SETUP
OMR: On
Off
ADVANCED SETUP
DEFAULT SETUP
2.4 Explanation of the menus, cont.