MBM Corporation 49 - Manual (Page 6)

T10114 Jan 2001
Sheet Feeder Model 49 Operator Manual
2.3 How to Read the Display
2.4 Explanation of the Menus
MODE On-line
PROOF
The arrow on the left side of the display shows option
currently selected.
Pressing the OK button on the control panel confirms your
selection and the corresponding submenu will appear in the
display.
On the right side of the display, up and / or down arrows
appear if other options can be selected.
These arrows are also displayed when the value of the
selected option can be increased / decreased, using the
arrow buttons. Use the up/down buttons on the control
panel for selecting, scrolling or adjustment.
Length: 210mm
Sheets/Set= 1
L=210mm BS=70%
SHEETS PER SET
LENGTH
The ”Main Menu” shows ”START” when the Model 49 is
switched on. The information shows the Model 49 is ready to
start, this example on-line with the system. The number 1 in
the display indicate “Placement” of the machine.
For more information about “Placement” see table on page
7.2.
Press the OK button on the control panel to confirm your
selection and the Model 49 will start. When the Model 49 is
installed in a system with a Mailer/Inserter Model 45 and a
Feeder Model 306/310, the complete system can be started
from any start button on any of the units. The ”Main Menu” will
be replaced with the ”Run Mode Menu” as soon as the
Model 49/system is started.
START 1
MODE On-line
STOP 00075
PAUSE
Main Menu
Run Mode Menu
2-3