MBM Corporation 49 - Manual (Page 18)

T10114 Jan 2001
Sheet Feeder Model 49 Operator Manual 3-8
After the setting up of attached units according to their respective operator instructions, the
system is ready to be started. The system can be started and stopped using the start and
stop buttons on any unit in the system.
3.5 Start inserting
If you wish to reset the set counter select ”Clear counter” and press the OK button. The next
menu shows the actual value of the set counter. Clear the set counter by pressing the OK
button.
If you wish to program a specific number sets for a job, select ”Preset counter” and press
the OK button. The next menu shows the actual value of the preset counter and how many
more sets to go to finish the job. Enter a new value using the arrow buttons.
Default value is 0. Confirm by pressing the OK button.
3.4 Programming the Model 49, cont.