4 explanation of the menus, cont – MBM Corporation 49 User Manual

Page 8

Advertising

T10114

Jan 2001

Sheet Feeder Model 49 Operator Manual

2.4 Explanation of the Menus, cont.

MODE On-line

PROOF

CLEAR COUNTER

PRESET COUNTER

On-Line
Off-Line

Off-Line
Stand Alone

Sheets/Set= 1
L=210mm BS=70%

Clear Counter

00075

Counter

:00100

Remaining

:00025

START 00075
MODE On-line

Scrolling down from the ”Start Menu”, using the arrow but-
tons, you will find several options. Press the OK button at the
desired option to enter the corresponding ”Adjustment
Menu” as illustrated in the figure to the left. How each adjust-
ment menu works in detail will be described later on in this
text. After adjustments press the OK button to confirm
changes or the ESC button to cancel. In either case you will
be returned to the ”Option Menu’s”.

Decide whether the Model 49 should be on-line or off-line
with the system or be operated as a stand alone unit.

This menu provides information of basic settings, number of
sheets per set, insert length and belt speed. No changes
can be made here.

Clears the set counter when the OK button is pressed.

Enter the number of sets for the desired preset value using
the arrow buttons. Default value is 0. This menu can also be
used to check the setting of the preset counter and the
number of sets to go before the job is completed.

NOTE: When checking, use the “ESC” button to leave the menu

without changing the settings.

Option Menu

Adjustment Menu