MBM Corporation 102 - Manual (Page 16)

T10087 February 1999
Stapler Folder Model 102 Operator Manual
3.6 Restoring the factory set A3, A4 or A5 program
3-9
This section shows you how to restore the factory set program.
You might want to do this after you made fine adjustments of the A3, A4 or
A5 program but no longer need those adjustments.
1 Select the type of finishing and paper size format, for which you want
to restore the factory preset paper size program.
2 Press and hold the paper size button until the indicator light goes off
and then comes back on after approximately 7 seconds.
3 Again, press the type of finishing button. The factory set program is
restored and the Model 102 will set up the retrieved format.
Example:
Restoring the factory setting for side stapling of A4 paper size.
1 Press the side/corner stapling button. The paper size program indica-
tors will now lit up in sequence (running light). Press the A4 button.
Wait until the Model 102 is finished setting up the “old” adjustments.
2 Press and hold the A4 button until the indicator light goes off and then
comes back on after approximately 7 seconds. The type of finishing
indicators will now lit up in sequence (running light).
3 Press the side/corner stapling button. The factory set program is
restored and the Model 102 will set up the retrieved format.