MBM Corporation 102 - Manual (Page 5)

T10087 Febrary 1999
Stapler Folder Model 102 Operator Manual 2-2
The belt stacker is used when stapling/folding or folding only is selected. The function of the
belt stacker is the same whether the feed is automatic or manual.
The back of the belt stacker is normally angled upward (about 15 degrees to horizontal),
but can be lowered to allow booklets to drop into a box.
The output wheels should be positioned at the innermost notch for A4, A5 ( 8.5”x14”,
8.5”x11”) and similar sizes, at the middle notch for A3 (11”x17”) and similar sizes, and at
the outermost notch for storage. Using customized formats the output wheels should be
positioned approximately 50mm from the leading edge of the first set.
2.1 Main components, continues
1 Set output wheel
2 Belt stacker
3 Delivery tray (optional)
1
2
3
The optional delivery tray is used for side or corner stapling if there is no trimmer attached.
When side or corner stapling is selected, the fold stop moves away automatically and the
stapled sets are delivered onto the tray.