MBM Corporation 102 - Manual (Page 17)

T10087 Febrary 1999
Stapler Folder Model 102 Operator Manual
3.7 Jam indications
Staple(s) missing indicator
The staple(s) missing indicator is illuminated when a set is missing one or
two staples. The model 102 will automatically shut down the on-line system
when this indicator is lit. Check/replace the staple cartridge(s) according
to section 4.1.
Stacker full indicator
The stacker full indicator is illuminated when the belt stacker is full. Re-
move the completed sets.
Paper jam indicator
The paper jam indicator is illuminated when an operation in the Model 102
is not done within the preset time. Open the top cover and remove the
jammed sets reachable.
If necessary:
•
Lift the fold roll guide cassette.
• Turn the upper fold roll using the open end wrench at the hex grip at the
front side of the roll. The Model 102 is delivered with an open end
wrench for that purpose in the tool box.
• Press the staple stop down and move the paper guides apart.
• Fold down the fold roller guide cassette and reposition the paper
guides. There is a magnetic lock holding the paper guides together.
Close the top cover and the model 102 will automatically purge remaining
jammed sets.
Staplers or side joggers incorrectly positioned indicator
The staplers or side joggers incorrectly positioned indicator is illuminated
when the distance between the side jogger and the stapler is to narrow.
Check/adjust the position of the staplers according to section 3.2. Switch
the power off and then on again to reset the position of the side joggers.
3-10