Microcom 326M User Guide User Manual
Page 40
Printer Modes
Chapter 4
28
326M User’s Guide
Figure 12
^D326-List Settings Example
Settings (D326 or <Ctrl> V)
Operational
Print Speed:
(D635) 6.0 ips
Detector mode:
(D636) 0 (none)
Slew Speed:
(D645) 6.0 ips
Darkness:
(D690) 75 (Dark)
Retraction delay:
(D641) 0.5 sec.
Print delay:
(D640) 0.0 sec.
Labels printed:
(D655) 42
Distances
Label width (LSX):
(D631) 3.34 inches
Label height (LSY):
(D632) 1.5.12 inches
Reg. mark height (GAP):
(D633) 0.148 inches
To reg’n mark (DRM):
(D634) 0.0 inches
X offset (OFX):
(D637) 0.0 inches
Y offset (OFY):
(D638) 0.0 inches
Dist. Past Gap (DPG):
(Auto)
1.225 inches
Activate Gap Det (AGD)
(Auto)
0.0 inches
Advance/retract:
(D642) 0.512 inches
Roll diam. ref. length:
(D646) 10.0 inches
Black line det to head:
(D648) 2.32 inches
Gap det to head:
(D649) 2.34 inches
Printhead
Width:
(D647) 4.094 inches
Resolution:
(D647) 203 dpi
Serial port settings
(D670) 9600,N,8,1
Ethernet
Active at 10/100
MAC:
0x000257795634
Internet Protocol
Printer port number:
(D674) 23
Printer addr:
(D675) 192.168.200.3
Server/Host addr:
(D676) 192.168.200.1
Gateway addr:
(D677) 192.168.200.1
Broadcast addr mask:
(D678) 192.168.200.255
Net addr mask:
(D679) 255.255.255.0
Parallel port settings:
Not installed
USB port settings
Not installed
Thresholds
Gap:
(D680) 30
Black line:
(D681) 120
Stock:
(D682) 110
High head temperature:
147
Low head temperature:
24
PWM periods
Gap:
12
Black line:
41
Label Present:
64
Stacker:
64
NOTE: Some items may not be correct until after a scripted
label has been printed or Auto-size (D310) has been run.