MicroLinks PRO10 - user guide - Manual (Page 15)

13
of system setting model after confirmation. Press button
(Return) to quit the model.
(A) TV output mode : You can choose PAL or NTSC
output.
(B) Auto shut down mode ：This function can help you
shut off the machine after a selected period of inactivity.
Or to choose “never” to skip this function.
(C) White balance : set white balance automatically for
switching on and off. Automatic white balance can
correct image’s contrast and color. We suggest you
switch on automatic white balance to achieve optimum
result.
(D) Status display : Use the button to display the status.
The user can set whether to display all status marks in the
image.
(E) Factory default : Revert to factory default settings.
(F) Delete DSC/VID : delete VID stored in SD Card and
files in DSC folder. VID is for storing videos, and DSC is
for storing photos.
(8) About : the model to check relevant information of the
product. Press button (Return) to quit the model.
1.5 External Interfaces of Microscope
The machine contains many external interfaces. The
following contents give instructions about assembly of the
accessories. Please use accessories provided together with the
machine including transmission line and SD Card, etc. Do not use
other size of accessories, which might cause the machine failed or
incompatible with accessories.
(1) Connect USB Transmission Line: joints at two ends of USB
transmission line are different. Smaller joint is used to connect
microscope host, and the larger one is used to connect USB
connection port of the Computer. While connecting to
computer, power source can also be provided besides
transmitting images (PC Camera). Please refer to the following
image about connection way of USB transmission line.
(2) Link AV Terminal Transmission Line: please refer to the
following image for the linkage.