MicroLinks PRO10 - user guide - Manual (Page 20)

18
Preview Window as follows:
(9) Print Images : print images displayed in Images Preview
Window.
(10) Quit : close the Application Program.
3.5 Files List
Files List is primarily applied to list all current files contained
in folders. Select BMP, JPG or AVI to view saved images/videos.
3.6 Special Functional Modules
Start Application Program and connect them. Then tools of
Special Function Modules will be showed below Video
Information Preview Window including comparison, center
concentration, image control and measurement as follows:
(1) Comparison Model : observe similarity of compared
images through overlapping and half-half comparison. Before
using the model, please load the image for application of other
functions. For tools of comparison model, please refer to the
following image:
(2) Center Concentration Model : the model provides 4
different center concentrations including cross, scope,
rectangle and circular to aim at shot objects as an auxiliary
function. Please refer to the following image for tools of the
model.
(3) Image Control and rotation Mode : you can take the
machine by your left or right hand, adjust image direction of
yourself or object, as well as adjusting contrast, brightness and
exposure rate of the image. Please refer to the following image
for tools of Image Control Model.
(4) Measurement Model : the model can be used as rulers and
compasses. Further, the model can measure in the dynamic
(real-time image) or static (loaded images or frozen image)
images, as well as providing various measuring tools. Please
refer to the following image for tools of Measurement Model.
4. Printed Notice
Please read the following information before operate.