MicroLinks PRO10 - user manual - Manual (Page 33)

PRO10 Application Program http://www.ViTiny.com
33
Copyright © 2008-2011 MicroLinks Technology Corp.
Fig.5-6 click the load image button
Click “Load image” button. After opening the file, it can use overlapping and cut half
image function. shown Fig.5-7. If want to exit the program just click on “Load image” to go
back to preview mode.
Fig. 5-7 After loading image
5.1.3Overlap comparison “
”
The “overlap comparison” can makes the image transparence. With overlap in the
video image, then at the same time shows two frames. Show in Fig.5-8.