MicroLinks PRO10 - user manual - Manual (Page 50)

PRO10 Application Program http://www.ViTiny.com
50
Copyright © 2008-2011 MicroLinks Technology Corp.
Fig.5-47 Setting scale dialog
 Scale default file
Scale default files have two types “Default Height Magnification” and
“Default Height Magnification” shown in Fig.5-48
Fig.5-48 Scale default File
When the microscope is observing object with contacted distance, it has two
focus points. Thus, it will have two kinds of scale value which are for low and high
mag. When in low mag, the horizontal and vertical scale is 5.60 mm and 4.20mm.
And when in high mag, the horizontal and vertical scale is 1.40mm and 1.05mm. If
the default value is not right for the user, the scale value can reset or create a file
for new value by calibrate the horizontal and vertical scale according to the user‟s
preferences.
If want to return to the default file, check “Scale default” box than it will
return back to two default files and the other files will be deleted.
 Create a new scale file
Click “new” button than it will pop up shown in Fig.5-52 a dialog box and
input new scale name.