MicroLinks PRO10 - user manual User Manual
Page 58
PRO10 Application Program http://www.ViTiny.com
58
Copyright © 2008-2011 MicroLinks Technology Corp.
Fig 5-66, the figure can be measure as 2 Point Circle. 1
st
circle: Circumferences
C=2.409mm, 2
nd
circle Area A=0.450 mm
2
, 3
rd
circle: R=0.727mm, 4
th
circle:
D=1.480mm.
Fig.5-66 3 Points Circle
(4) Oval: Measure an oval circle and use
. Firstly choose Fig.5-67 Scale
information setting dialog. To point any dot on an oval, pressing the left mouse
button, and drag to fit the oval on an observation object. Same methods as
Circle to be measured for 2 Points Circle and 3 Points Circle, 1
st
oval C=6.703m,
2
nd
oval A=2.947mm
2
, 3
rd
oval: lR=1.328mm, sR=0.714mm, 4
th
oval
lD=2.826mm, sD=1.428mm.
Fig 5-67 Oval
(5) Square: To measure the object is a parallelogram, it can use
. Firstly choose
Fig.5-63 Scale information setting dialog. To point one dot on the angle,
pressing the left mouse button, and drag the diagonal to make a square and fit the
observed object. See Fig 5-68 , P：Perimeter, A: Area, see Fig 5-68, the top