MicroLinks PRO10 - user manual - Manual (Page 37)

PRO10 Application Program http://www.ViTiny.com
37
Copyright © 2008-2011 MicroLinks Technology Corp.
5.2 Aiming mode
The aiming mode may draw different type like the cross, circular, rectangle, and area. It
helps the user observation. It can draw the different aiming mode in the video image. Fig.5-15 is
the selection to aiming mode, aiming toolbar shown in Fig.5-16. This mode may overlap the
different aiming functions.
Fig. 5-15 Aiming mode
Fig. 5-16 Aiming mode of toolbar
5.2.1Draws cross “
”
Click this button to draw the cross which may adjust the size by scrollbar. Show in
Fig.5-17.
Fig.5-17 draws cross
5.2.2Draw area “
”
Click the button to draw the area to adjust the size by scrollbar. Show in Fig.5-18.