MicroLinks PRO10 - user manual - Manual (Page 54)

PRO10 Application Program http://www.ViTiny.com
54
Copyright © 2008-2011 MicroLinks Technology Corp.
圖 5-57 Setting of picture magnification
ratio display
圖 5-58 Saved ratio
 To delete and rename scale file
 Choose delete or rename the file from the drop down menu, see Fig.5-59.
Then click “delete” or “rename”.
Fig.5-59 drop down menu choose file
 Semi-Auto Calibration
Set up a customized semi-auto Calibration. See Fig. 5-60. “Input
Measurement Length” means the real length. For example, enter 400 means
4.00mm, enter 50 means 0.5mm. The Display Scale check-box is to decide to show
the Display Scale or not. If click the Horizontal Fixed, only a horizontal axis can
draw on the image; on the contrary, if click the Vertical fixed, only a vertical axis
can draw on the image. If choose “None”, axis can draw from any direction. A
horizontal or vertical axis can be draw by pressing „shift‟ button on your keyboard
together with clicking mouse left. After it is completed, please click “Finished” for
saving the new scale.