MicroLinks UM05 - user manual User Manual
Page 50
Microscope Application Program http://www.ViTiny.com
50
Copyright © 2008-2012 MicroLinks Technology Corp.
Fig. 5-31 Calibrator
The picture shown as Fig. 5-31 is calibrator. The main purpose for the Cross is to
calibrate the program and also as a measurement. The Cross (See above chart c) has 3
kinds of units as 0.05mm, 0.1mm and 1mm scale. It will measure 0.05mm, 0.1mm
at high magnification and 0.1mm, 1mm at low magnification. The Cross can
measure the Length and Width accurately, ie.: Fig.5-34, Measure the length of the
onion cell as the red rectangle which is approximate 0.400mm.
Fig.5-32 The Cross
The more precise ruler, the more accurate measurement can be obtained under high magnification.
The use “metal ruler” and “calibrator” the biggest difference is as follows:
When the magnification is high, use the calibrator can easily and accurately
knows the scale range.
6.1
3.5
0.6
1.1
0.9
0.8
1.3
1.5
1.7
1.9
2.9
2.7
2.5
2.3
2.1
3.1
3.3
3.7
3.9
4.9
4.7
4.5
4.3
4.1
5.1
5.3
5.5
5.7
5.9
6.9
6.7
6.5
6.3
6.2
6.4
6.6
6.8
5.8
5.6
5.4
5.2
4.2
4.4
4.6
4.8
3.8
3.6
3.4
3.2
2.2
2.4
2.6
2.8
1.8
1.6
1.4
1.2
0.7
1.1
0.9
0.8
1.3
1.5
1.7
1.9
2.9
2.7
2.5
2.3
2.1
3.1
3.3
3.5
3.7
3.9
4.9
4.7
4.5
4.3
4.1
5.1
5.3
5.5
5.7
5.9
6.9
6.7
6.5
6.3
6.1
6.2
6.4
6.6
6.8
5.8
5.6
5.4
5.2
4.2
4.4
4.6
4.8
3.8
3.6
3.4
3.2
2.2
2.4
2.6
2.8
1.8
1.6
1.4
1.2
1.1
0.9
0.8
1.3
1.5
1.7
1.9
2.9
2.7
2.5
2.3
2.1
3.1
3.3
3.5
3.7
3.9
4.9
4.7
4.5
4.3
4.1
5.1
5.3
5.5
5.7
5.9
6.9
6.7
6.5
6.3
6.1
6.2
6.4
6.6
6.8
5.8
5.6
5.4
5.2
4.2
4.4
4.6
4.8
3.8
3.6
3.4
3.2
2.2
2.4
2.6
2.8
1.8
1.6
1.4
1.2
1.2
1.4
1.6
1.8
2.8
2.6
2.4
2.2
3.2
3.4
3.6
3.8
4.8
4.6
4.4
4.2
5.2
5.4
5.6
5.8
6.8
6.6
6.4
6.2
6.1
6.3
6.5
6.7
6.9
5.9
5.7
5.5
5.3
5.1
4.1
4.3
4.5
4.7
4.9
3.9
3.7
3.5
3.3
3.1
2.1
2.3
2.5
2.7
2.9
1.9
1.7
1.5
1.3
0.8
0.6
0.7
0.9
1.1
7
6
5
4
3
2
1
7
6
5
4
3
2
7
6
5
4
3
2
1
7
6
5
4
3
2
1
mm
c
6.1
3.5
0.6
1.1
0.9
0.8
1.3
1.5
1.7
1.9
2.9
2.7
2.5
2.3
2.1
3.1
3.3
3.7
3.9
4.9
4.7
4.5
4.3
4.1
5.1
5.3
5.5
5.7
5.9
6.9
6.7
6.5
6.3
6.2
6.4
6.6
6.8
5.8
5.6
5.4
5.2
4.2
4.4
4.6
4.8
3.8
3.6
3.4
3.2
2.2
2.4
2.6
2.8
1.8
1.6
1.4
1.2
0.7
1.1
0.9
0.8
1.3
1.5
1.7
1.9
2.9
2.7
2.5
2.3
2.1
3.1
3.3
3.5
3.7
3.9
4.9
4.7
4.5
4.3
4.1
5.1
5.3
5.5
5.7
5.9
6.9
6.7
6.5
6.3
6.1
6.2
6.4
6.6
6.8
5.8
5.6
5.4
5.2
4.2
4.4
4.6
4.8
3.8
3.6
3.4
3.2
2.2
2.4
2.6
2.8
1.8
1.6
1.4
1.2
1.1
0.9
0.8
1.3
1.5
1.7
1.9
2.9
2.7
2.5
2.3
2.1
3.1
3.3
3.5
3.7
3.9
4.9
4.7
4.5
4.3
4.1
5.1
5.3
5.5
5.7
5.9
6.9
6.7
6.5
6.3
6.1
6.2
6.4
6.6
6.8
5.8
5.6
5.4
5.2
4.2
4.4
4.6
4.8
3.8
3.6
3.4
3.2
2.2
2.4
2.6
2.8
1.8
1.6
1.4
1.2
1.2
1.4
1.6
1.8
2.8
2.6
2.4
2.2
3.2
3.4
3.6
3.8
4.8
4.6
4.4
4.2
5.2
5.4
5.6
5.8
6.8
6.6
6.4
6.2
6.1
6.3
6.5
6.7
6.9
5.9
5.7
5.5
5.3
5.1
4.1
4.3
4.5
4.7
4.9
3.9
3.7
3.5
3.3
3.1
2.1
2.3
2.5
2.7
2.9
1.9
1.7
1.5
1.3
0.8
0.6
0.7
0.9
1.1
7
6
5
4
3
2
1
7
6
5
4
3
2
7
6
5
4
3
2
1
7
6
5
4
3
2
1
mm