Long shot/ non-contacted focus, Low magnification contacted focus, High magnification contacted focus – MicroLinks UM05 - user manual User Manual
Page 70: Return
Microscope Application Program http://www.ViTiny.com
70
Copyright © 2008-2012 MicroLinks Technology Corp.
key「3」
。
Fig 5-79 Three way of focusing
5.5.5Long Shot/ non-contacted focus “
”
When click
, it is for general webcam function. It will adjust the focus to find the
clearest image when in long shot distance; if the image is not clear enough, slightly adjust the
zoom in/out to find the clearest image. Please refer to 4.5.9, 4.5.10 and 4.5.11. Fast key
「F」。
5.5.6Low magnification contacted focus “
”
When observing under Low mag, please flatly put microscope device onto the object. Then
click
, it will search the focus range in low mag to find it’s clearest image. If the image is
not clear enough, slightly adjust the zoom in/out to find the clearest image. Please refer to
4.5.9, 4.5.10 and 4.5.11. Fast key「L」
。
5.5.7 High magnification contacted focus “
”
When observing under high mag, please flatly put microscope device on the object. Then
click
, it will search the focus range in high mag to find it’s clearest image. If the image
is not clear enough, slightly adjust the zoom in/out to find the clearest image. Please refer to
4.5.9, 4.5.10 and 4.5.11. Fast key「H」
。
5.5.8 Return “
”
This action is to return the focus point back to the high mag, no matter where it is. Fast key
「Z」。