MicroLinks UM05 - user manual - Manual (Page 62)

Microscope Application Program http://www.ViTiny.com
62
Copyright © 2008-2012 MicroLinks Technology Corp.
Fig.5-62 Scale information setting dialog
The “precision” is refers to under the decimal point of effective number of digits. The
effective number of digits can be adjusted. “Choose color” may choose the text color.
“Display unit” does not check its unit “mm” did not display. Attention, after setting option,
and also choose the “measuring means style”.
5.4.7Measurement tool styles
The measuring include optional Line, 2 Points Circle, 3 Points Circle, Ellipse, Square,
Rectangle, 3 Points Angle, 3 Points Fillet, 4 Points Angle, and Polygon for variable demand.
As shown in Fig. 5-63.
Fig.5-63 Measurement Tool Styles
(1) Line: Measure the Length and use . See Fig 5-63.
Firstly choose Fig.5-63 Scale information setting dialog. Measure the Length
on the PCB rectangle, choose the “line” icon, then draw a line, the “ L” means
Length. Ex: L=5.510mm as Fig. 5-64.