MicroLinks UM05 - user manual - Manual (Page 6)

Microscope Application Program http://www.ViTiny.com
6
Copyright © 2008-2012 MicroLinks Technology Corp.
1. Application Program Interface Introduction
After the user use Microscope application program, it will show illustration picture in Fig.1-1. A
tool is arranged and divided into the window. The main button and file tabulate is in 3 groups, which
the left and right windows are the two sub windows. On the left window, it will show Microscope
whether USB digital video device is connected. If it’s not connected the button will be a white result
as Fig.1-2 shows.
Fig.1-1 Main window picture
Fig.1-2 Connected button white
In the following, those main functions will be divided into four groups, one of the group needs to
be shown after connection is done as Fig. 1-6. These four groups are: