MicroLinks UM05 - user manual User Manual
Page 57
Microscope Application Program http://www.ViTiny.com
57
Copyright © 2008-2012 MicroLinks Technology Corp.
Fig.5-49 New scale name file dialog
After creating new file, input vertical and horizontal’s scale value shown in
Fig.5-50 and if want to change scale color, select on “choose color” button to
change color.
Fig.5-50 Input vertical and horizontal scale value
Scale ratio
The machine’s Sensor of image ratio is 4:3, if checked fixed ratio, then the
horizontal and vertical scale will make the adjustment by 4:3 ratio, shown in Fig.
5-51. For example, input in the horizontal scale value to 400, the vertical scale
value will automatically adjust to 300.
On the other hand, due to the AP will automatically calculate the scale range
for horizontal or vertical scale, thus, the user just need to measure and enter one of