MicroLinks UM05 - user manual - Manual (Page 65)

Microscope Application Program http://www.ViTiny.com
65
Copyright © 2008-2012 MicroLinks Technology Corp.
square on left P=7.295mm, the bottom square on left A=3.587 mm
2
.
P=7.295mm, the bottom square on left A=3.587 mm
2
.
Fig 5-68 Square
(6) Rectangle: Measure a rectangle and use . Firstly choose Fig.5-63 Scale
information setting dialog. To point one dot on the corner, press the left
mouse button, and drag the diagonal to make a rectangle to fit the observed
object. See Fig 5-69, P：Perimeter, A: Area, see Fig 5-69, the top rectangle on
left P=10.308mm, the bottom rectangle in the middle A=1.940 mm
2
.
Fig 5-69 Rectangle
(7) 3 Points Angle: Measure the angle on the object and use . In Fig. 5-70, it
can see an angle on the object, draw a line and stop at the corner of angle, and
then draw the other line from the angle; the angle can be automatically calculated.
a dot shows the measured angle, it is 135.5
o
.