Microsens MS453522M - Manual (Page 130)

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual
125
3-17. Configuration
The switch supports three copies of configuration, including the default configuration,
working configuration and user configuration for your configuration management. All of them
are listed and described below respectively.
Default Configuration:
This is the ex-factory setting and cannot be altered. In Web UI, two restore default
functions are offered for the user to restore to the default setting of the switch. One is the
function of “Restore Default Configuration included default IP address”, the IP address will
restore to default “192.168.1.1” as you use it. The other is the function of “Restore Default
Configuration without changing current IP address”, the IP address will keep the same one that
you had saved before by performing this function.
Working Configuration:
It is the configuration you are using currently and can be changed any time. The
configurations you are using are saved into this configuration file. This is updated each time as
you press <Apply> button.
User Configuration:
It is the configuration file for the specified or backup purposes and can be updated while
having confirmed the configuration. You can retrieve it by performing Restore User
Configuration.
Fig. 3-61