Microsens MS453522M - Manual (Page 205)

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual
200
set diffserv
Syntax:
set diffserv <ds-range> <class>
Description:
To set class of ports on IP DiffServe qos.
Argument:
<ds-range>: dscp field, syntax 1,5-7, available from 0 to 63
<class>: class of service setting. 1: high, 0: low
Possible value:
<ds-range>: 0 to 63
<class>: 1or 0
Example:
MICROSENS(qos)# set diffserv 0-20 1
set mode
Syntax:
set mode <port/pri_tag/tos/layer4/diffserv>
Description:
To set qos priority mode of the switch.
Argument:
<port>: per port priority
<pri_tag>: vlan tag priority
<tos>: ip tos classification
<layer4>: ip tcp/udp port classification
<diffserv>: ip diffserv classification
Possible value:
port/pri_tag/tos/layer4/diffserv
Example:
MICROSENS(qos)# set mode port
set port
Syntax:
set port <range> <class>
Description:
To set class of ports on port-based qos.
Argument:
<range> : port range, syntax 1,5-7, available from 1 to 8
<class> : class of service setting. 1: high, 0: low
Possible value:
<range>: 1 to 8
<class>: 1or 0
Example:
MICROSENS(qos)# set port 1-8 1