Microsens MS453522M - Manual (Page 48)

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual
43
IP Range:
The switch supports two kinds of options for managed valid IP Range, including
“Any” and “Custom”. Default is “Any”. In case that ”Custom” had been chosen, you
can assigned effective IP range. The valid range is 0.0.0.0~255.255.255.255.
Incoming Port:
The switch supports two kinds of options for managed valid Port Range, including
“Any” and “Custom”. Default is “Any”. You can select the ports that you would like
them to be worked and restricted in the management security configuration
if ”Custom” had been chosen.
Access Type:
The switch supports two kinds of options for managed valid Access Type , including “Any”
and “Custom”. Default is “Any”. “Http”, “Telnet” and “SNMP” are three ways for the
access and managing the switch in case that” Custom” had been chosen.
Action:
The switch supports two kinds of options for managed valid Action Type , including
“Deny” and “Accept”. Default is “Deny”. When you choose “Deny” action, you will
be restricted and refused to manage the switch due to the “Access Type” you choose.
However, while you select “Accept” action, you will have the authority to manage the
switch.
Edit/Create:
A new entry of Management Security Configuration can be created after the
parameters as mentioned above had been setup and then press <Edit/Create> button.
Of course, the existed entry also can be modified by pressing this button.
Delete:
Remove the existed entry of Management Security Configuration from the
management security table.