Microsens MS453522M - Manual (Page 78)

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual
73
Parameter description:
IGMP snooping mode selection:
The switch supports three kinds of IGMP Snooping status, including “Passive”,
“Active” and “Disable”.
Disable:
Set “Disable” mode to disable IGMP Snooping function.
Default: Disable
Active:
In Active mode, IGMP snooping switch will periodically issue the Membership
Query message to all hosts attached to it and gather the Membership report
message to update the database of the Multicast table. By the way, this also
reduces the unnecessary multicast traffic.
Passive:
In Passive Snooping mode, the IGMP snooping will not periodically poll the
hosts in the groups. The switch will send a Membership Query message to all
hosts only when it has received a Membership Query message from a router.
IP Address:
Show all multicast groups IP addresses that are registered on this device.
VLAN ID:
Show VLAN ID for each multicast group.
Member Port:
Show member ports that join each multicast group. Member port may be only or
more than one.