5 stopping, Operation – MMD Equipment 185S-6C1 User Manual
Page 33
4. Operation
4-15
4.5 Stopping
<Procedure>
①
Close the air valve completely and operate the machine about 5 minutes, until it cools down.
②
Turn the starter switch to “STOP” position to stop the engine. (Starting unloader valve should
stop with “operation” position.)
③
Remove the key from the compressor every time when you stop the engine. Keep the key and be
careful not to lose it.
Unless all the service valves are fully closed upon stopping operation, the compressed air will be
sent in reverse direction in the hoses (pipes) connected to air tools and relieved to atmosphere con-
tinuously through the auto-relief valve. Further, when re-starting operation next time, compressed
air will be jetted out through air valves.