MMD Equipment 185S-6C2 - Manual (Page 15)

2.Part Names
2-1
2.1 Internal Components and Part Names
7 8 9 10 11 12
No. Description Function
1 Oil separator For separating oil mist mixed in compressed air.
2 Pressure control For keeping the separator receiver tank pressure higher than 58psi (4bar) in the tank.
3 Safety valve
For releasing compressed air to the atmosphere when the pressure rises
higher than the rated pressure.
4
Air filter
(For Compressor air-end )
For filtering the dust floating in the intake air.
5 Speed regulator For regulating air-end revolution speed.
6 Air filter (For engine) For filtering the dust floating in the intake air.
7
Air bleeding electro-
magnetic pump For automatically bleeding air from fuel pipes.
8 Fuel filter
For filtering dust and foreign matter mixed or to be mixed in the
fuel oil.
9 Fuel tank For storing diesel fuel oil.
10 Engine oil filler port For supplying and replenishing engine oil to engine.
11 Reserve tank For checking engine cooling water level and for replenishing cooling water.
12 Radiator For cooling the coolant for engine because it is water-cooled.
13 Sedimenter For separating water mixed or to be mixed in the fuel oil.
14 Engine oil filter For filtering engine oil.
15 Engine oil level gauge For checking engine oil level.
16
Solenoid valve for
starting unloader
Control device for reduction of power under unloaded operation.
17 Fuel tank drain valve For draining condensate accumulated in fuel tank.
18 Pressure
regulator For regulating intake air volume.
19 Battery For electrically starting engine.
19 18 17 16 15 14 13
A100441
1 2 3 4 5 6