MMD Equipment 185S-6C2 - Manual (Page 17)

3. Installation
3-1
3.1 Transportation

When loading and unloading unit, be sure to use the lifting bail provided on the center of the unit top.

Never get under the unit which is lifted up, because it is very dangerous.

When unit is transferred or moved from working site, be sure to place it on truck bed, and fasten it by
ropes at the front eye and rear stand.

Never lift unit which is still in operation, or it could cause critical damage to each component or lead to
serious accident.
3.1.1 Lifting up
① Before lifting the unit up, make sure to check
the lifting bail for any crack and loosened
bolts.
② Connect the hook“1” of the crane or shackle
with lifting bail“2”eye fitted at the top center
of the unit, and make sure that there is no
person standing around the unit. Then
perform hoisting operation.
③ Select a truck or a crane with capacity
sufficient for weight and size of the unit by
referring to the values shown in Chapter 8
“Specifications“ of the manual.
3.1.2 Mounting the unit on the truck bed
 Be sure to fasten the unit with ropes“1” as
shown in the right figure,and securely fix it on
the truck bed.
 Be sure to put one set of chocks“2”to
the wheels.
1 2
Transportation
1
A100460
1 2
A100461