Periodic inspection/maintenance – MMD Equipment 185S-6C2 User Manual
Page 47
5.Periodic Inspection/Maintenance
5-14
5.5.19 Change oil separator
[Every 2,000 hours]
When changing the oil separator, both cover and element must be replaced with new ones.
Even before the periodic interval time of replacement, replace the oil separator whenever the oil
consumption increases and also oil is found mixed in the discharge air.
When consumption of the oil is still unusual even after cleaning strainer in the scavenging orifice
(See 5.5.7)
, change the oil separator with a new one.
(For Replacement parts, See 5.4)
When replacing oil separator, contact directly us or distributor because it requires expert technical
knowledge.
5.5.20 Change pressure regulator
[Every 3,000 hours]
Remove pressure regulator and rebuild or replace with a new unit. (For part number, see 5.4)
Separator
casing
Element
Cover
Oil
separator
Separator cover
A100371
O-ring
A100463-1