NavCom StarUtil Rev.G - Manual (Page 108)

StarUtil User Guide – Rev. G
„ Add Messages
Figure 101: NMEA Message Type Menu
9 Right-click in a blank Message Type cell. A menu opens with a list of messages (see
Figure 101).
9 Click on a message in the menu to add it to the message output list. On Change is the
default rate for every message added to the list.
‡
Use of the default rate for all NMEA
messages.
„ Configure Message Rate
On Change is generally recommended
Go to the next section for details.
Figure 102: NMEA Rate Menu
Rate: Right-click on the Rate cell to open the menu to schedule the frequency of output for a
message (see Figure 102). Use of the default rate On Change is generally recommended
for all NMEA messages, including GGA and VTG. Change the rate for GGA and VTG to
On Change, if desired.
The term On Change indicates that the receiver will output the specified
message each time new data is available.
The NMEA messages GGA, RMC, and VTG match the output of the navigation
rate up to 10 Hz max when scheduled as On Change. Refer to the description of
the
Navigation Rate option
9
‡
‡
on the Rover / Navigation & Tracking Setup window
7-106