NavCom StarUtil Rev.G - Manual (Page 87)

StarUtil User Guide – Rev. G
D3 – LBM DSP Status
The D3-LBM DSP Status tab provides information about the current performance of the
StarFire
™ satellite in use.
9 Click the Retrieve button to view the current output data:
• SF Satellite ID: The ID for the currently used StarFire™ satellite.
‡
Refer to Table 3 and Table 4 for StarFire
™ satellites.
• Tracked baseband freq: For NavCom internal use only
> 8 Strong
• Authorization status: For NavCom internal use only
• Use alternat
ually selected
™ satellite or
Alternate StarFire
™
Satellite
• SF signal C/NO: The StarFire™ signal strength:
< 0 Not Tracking
< 4 Weak
4-8 Good
e channel: Indicates whether or not the satellite used is man
(“Yes” or “No”). The manually selected satellite may be a licensed StarFire
the user-defined satellite (if defined). Refer to the section above,
, for details.
Figure 82: D3 – LBM DSP Status
6-85