ONICON F-5100 Insertion - Manual (Page 10)

11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax (727) 442-5699 • [email protected]
F-5100 Insertion Thermal Mass Flow Meter Manual 05/15 - 0663-20 / 18333 Page 10
SECTION 2.0: UNPACKING
ONICON Insertion Thermal Mass Flow Sensors are packed and shipped in individual cartons.
An optional installation hardware kit, if ordered, will be packaged with each sensor. All other
installation hardware and peripheral devices, including flow conditioners, will be packaged and
shipped separately.
Please open all packages with care to prevent damage to their contents. Carefully inspect each
item for signs of damage in transit. The flow sensor stem should be straight and free of blemishes or
abrasions.
All ONICON products are shipped insured unless the customer specifically requests otherwise. Please
notify the shipping company and ONICON immediately if any items are damaged in transit. Save all
packing material for inspection by the shipper.
2.1 CHECKING THAT YOU RECEIVED EVERYTHING
Standard Documentation
Enclosed with each sensor is a comprehensive documentation package that includes the
following items:
• Installation and Operation Guide
• Flow Sensor Calibration Certificate
• Product Data Sheet
• Scaled Pulse Isolator Module
Please notify the ONICON customer service department if any of these documents are
missing.
Product
• F-5100 Insertion Thermal Mass Flow Sensor
• Optional Installation Hardware Kit, if ordered