Pacific Research Solutions PET-820 User Manual
Page 19
Pacific Research
PET-820 User Manual
Page 18
3.9.14 READ ANALOG LOW (MINIMUM) VALUE
This command reads the minimum analog voltage which occurred since the last time it was reset. The minimum voltage will
also include the time and date at which it occurred. This feature monitors all analog inputs at all times, so when you are
ready to start recording the minimum voltage you will need to reset this feature using programming command code 66.
COMMAND CODE:
65
SYNTAX:
65 [Input] #
WHERE:
Input = 1 through 8
EXAMPLE:
65 1 # = Read analog low value, input channel number 1
65 8 # = Read analog low value, input channel number 8
3.9.15 READ ANALOG SCALED VALUE
This command may be used to read a scaled value of an analog input. This feature can be useful for reading an analog
voltage as PSI, FEET, TEMPERATURE, Etc. (For more information on setting up the scaling for an analog input, refer to
section 4.6.12 of this manual).
COMMAND CODE:
67
SYNTAX:
67 [Input] #
WHERE:
Input = 1 through 8
EXAMPLE:
67 1 # = Read scaled analog value input channel number 1
67 4 # = Read scaled analog value input channel number 4