Philco PHBM 7000 - Manual (Page 6)

4 Revison 06/2014 Copyright © 2014, Fast ČR, a. s.
EN
PART 3: DESCRIPTION OF THE CONTROL PANEL
Your selected program Running time of the selected program
START/
STOP
button
Turning on the appliance
Connect the power cord to an electrical power socket and switch the main switch on the rear side of the
appliance to position I. The display of the breadmaker will be lit and a sound will be made. “1 3:00” will appear
on the display. The colon between the numbers “3” and “00” is not fl ashing at this point. When the appliance
is turned on, the default program is selected automatically.
The number “1” designates the selected program, the number 3:00 designates the duration of the selected
program, the arrow on the left edge of the display points to the weight 1000 g, the arrow on the top edge
of the display points to MEDIUM.
Starting a program
This button serves to start and stop the selected program.
When the “START/STOP” button is pressed, a short sound is made and the colon in the time fi gure on the
display starts fl ashing and the program starts running. Once the program is started, all buttons except for the
“START/STOP” button are inactive.
Ending a program
The currently running program can be stopped by pressing and holding down the “START/STOP” button for
approximately 1.5 seconds. A sound will be made confi rming that the program was ended.
MENU button
This button is used to set the desired programme. Repeatedly press the MENU button to scroll through the
programs available on the breadmaker. The number of the currently selected program is always shown on the display.