Remko wkf / wkf-compact, Ab c – REMKO WKF 85 User Manual

Page 30

Advertising
background image

Water heat pumps require two wells in order to

obtain heat from the groundwater, one supply well

and one dry well. The development of this source

is not possible everywhere, it is expensive and

requires planning permission.

Function of the heat pump

A heat pump is a device which makes use of a

working medium to absorb ambient heat under low

temperatures and transports this heat to a place

where it can be of use for heating purposes. Heat

pumps work according to the same principles as a

refrigerator. The difference is that heat, the by-

product of the refrigerator, is the goal of the heat

pump.

The main components of the cooling circuit consist

of an evaporator, a compressor, a condenser and

an expansion valve. In a finned evaporator,

the refrigerant evaporates both because of lower

pressure and because of lower heat-source tem-

peratures through absorption of energy from the

environment. In the compressor, the refrigerant is

brought to a higher pressure and temperature by

the application of electrical energy. Next, the hot

refrigerant gas reaches the condenser, a plate

heat-exchanger. Here the hot gas condenses,

transferring heat to the heating system. The lique-

fied refrigerant then expands and cools in a flow

regulator, the expansion valve. Then the refrig-

erant flows into the evaporator once more and the

cycle is complete.

For control, a Smart-Control is included which

ensures the independent operation of all safety

devices. The water-circulation system of the Series

WKF consists of a circulation pump, plate heat-

exchangers, dirt traps, safety valve, a manometer,

fill- and drain valves, an automatic air-bleeder and

flow switch. The WKF-compact series has, in addi-

tion, a 3-way changeover valve and a domestic hot

water storage.

Wall- and floor consoles, condensate pans, con-

densate tray with heating, a 3-way changeover

valve, a overflow protection valve and other sen-

sors are available as accessories.

3

1

A

B

C

2

4

D

Fig. 32: Functional diagram heating inverter heat pump

A:

Outdoor area

B:

Indoor area

C:

Heating pump outdoor module

D:

Heating pump indoor module

1:

Condensing

2:

Evaporation

3:

Decompression

4:

Liquefying

REMKO WKF / WKF-compact

30

Advertising
This manual is related to the following products: