Warning displays – SIGMA SD1 User Manual
Page 123
122
WARNING DISPLAYS
COLOR LCD MONITOR MESSAGES
“No Memory Card”
►
Please Insert the card. (P.39)
“Card Error”
►
Format card. If the error persists, replace with new card. (P.41)
►
The card may be damaged.
“Card Full”
►
Delete unwanted photos, choose a lower resolution setting, or use a
different card. (P.39-40) (P.96-97)
“No images on Memory card”
►
To review images, insert a card with valid SD1 images, capture new images
onto the card, or press
button again to turn off display.
“Cannot preview this image”
►
It may have been taken by another camera or the image data may have
collapsed.
“Cannot magnify this image”
►
It may have been taken by another camera or the image data may have
collapsed.
“Cannot save this image!”
►
The card may be damaged. Please transfer the data to another hardware
such as a PC and then format the card in the PC. If the same message is
displayed, the card may have collapsed. Please use a new card.
An error has occurred! Error code # # #.
►
Turn the camera off and back on. If the problem persists, call Technical
Support and give them the error number.