Save the custom mode setting, Load the custom mode setting – SIGMA SD1 User Manual
Page 86
85
SAVE THE CUSTOM MODE SETTING
1
Set the above settings to your desired
combination.
2
In [
Camera Settings] (P.28) →
[Custom Mode Setting], select from C1, C2
or C3 by using
buttons. After selecting,
press the
button. A confirmation dialog
will appear.
3
Press the
button to save the settings or
to close the confirmation dialog
without saving the settings.
WARNING !!
•
When the new setting is saved, the previous stored setting will be overwritten.
LOAD THE CUSTOM MODE SETTING
Set the Mode dial to
C1, C2 or C3.
In custom mode, it is possible to change the above settings
temporarily (except Exposure Mode).
If the setting is changed, ★ mark will appear in Function
Display.
Return to original registered setting by doing the following.
z
Turn the camera off (this includes the camera turning off automatically with the
Auto Power Off function)
z
Set the Mode dial to another position.