Notice – Sim2 MICO 50 User Manual
Page 40
MiCO 50
2
notice
WARning!
To meet FCC requirements, a shielded power cord is recommended in order to prevent interference. It is essential
•
that only the supplied power cord is to be used. Use only shielded cables to connect I/O devices to this equipment.
You are cautioned that changes or modifications not approved by the party responsible for compliance could void
your authority to operate the equipment.
High brightness light source. Do not stare into the beam of light, or view directly.
•
Be especially careful and
ensure that children do not stare directly into the beam of light.
To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
•
Some IC chips in this product include confidential and/or trade secret property belonging to Texas Instruments.
•
Therefore you may not copy, modify, adapt, translate, distribute, reverse engineer, reverse assemble or decompile
the contents thereof.
The ventilation slots and objects next to them may get extremely hot during operation. Do not touch these areas until
•
they have sufficiently cooled down.
CAUTiOn!
For minimal servicing and to maintain high image quality, we recommend that you use the projector in an environment
•
that is smoke and dust free. When used in areas where there is a lot of smoke or dust, the filter and lens should be
cleaned often to lengthen the service life of the projector.
Caution regarding the exhaust of the projector
Do not place the projector in space that is poorly ventilated or confined. Allow at
•
least 50 cm clearance from walls and free air flow around.
Before using the projector, please read this operation manual carefully.
•
To facilitate reporting the loss or theft of your Projector, record the Serial Number
•
located on the bottom of the projector. Before recycling the packaging, be sure that
you have checked the contents of the carton thoroughly against the list of “Package
Contents” on page 5.
sYMBOl EXPlAnATiOns
DisPOsAl:
Do not use household or municipal waste collection services for disposal of electrical
and electronic equipment. EU countries require the use of separate recycling
collection services.
Wall
or
Block
Air