Sim2 MICO 50 - Manual (Page 60)

MiCO 50
22
Aspect setting
Choose what Aspect will be to setup and the selected aspect did not apply 1.
on current image except User 1/2/3.
The "Screen" setting is available for every Aspect and used for 12V trigger 2.
setting and its default for each aspect is Off.
The H/V adjustment is only available for Aspect User 1/2/3. 3.
Primaries
The Primaries are the color gamut for RGB. The Primaries is default on Auto.
White Point
The White Point High is closed to 9300K, Medium is to 8500K, Low is to 5400K,
and Native is the LED native white point without any calibration. To adjust
coordinates of white point, select "User".
gamma
Use this option to adjust the gamma correction of the image. Default setting is 2.2. Gamma correction provides eight
sets of gamma corrections 1.0, 1.5, 1.8, 2.0, 2.2, 2.35, 2.5, and 2.8.
Dynamic Black
This function utilizes the contrast of colors to enable black colors to appear blacker on screen while significantly
enhancing the performance of black scenes.
To enable the function, set it to “ON”.
Overscan
This function enables you to remove some edges of the image.
Overscan Type
The following options are available:
Selection Description
Zoom Scales or zooms the image.
Crop Cuts a portion of the image.
Overscan Adjust
This function enables you to adjust the image display on screen. Available options are from 0-10. The
default value is 1 which is suitable for S-Video/Composite, 480i/p, 576i/p, and analog 1080i/p input sources.
Press “ • t ” or “u” to select value.
note
The adjustable range is 0~1 when 1080i and 1035i • input.
The adjustable range is 0~5 when 1080p input. •