Sim2 MICO 50 - Manual (Page 63)

English
MiCO 50
25
Test Pattern
Select to display test patterns.
sync Threshold
This function is only available on Component input.
The projector is compatible with SDTV(480i and 576i), EDTV(480p and 576p), and HDTV(720p,1080i and 1080p) video
signals. If a hardware device, such a DVD player, is not syncing properly with the projector, adjust this option to help it to
sync when connected to the projector.
Auto Power Off
When an input signal is not detected and you don't press any input button on keypad or remote for more than 15
minutes, the projector will automatically turn off if set to “ON”.
Auto Power OFF function will be disabled when it is set to “OFF”.
note
When the Auto Power OFF function is set to “ON”, 5 minutes before the power turns off, the •
message “Power OFF in 5 min.” will appear on the screen to indicate the remaining minutes.
source select
Used to select the input source automatically when there is no signal in the current input.
Source Select
Auto
Manual
note If you select "Auto", then the input source is selected automatically. •
high Altitude Mode
When it selected in ON, all the fan in the projector will be running in high speed mode.
lens shift
The function allows you to adjust the height and width of the projected image within the shift range of the lens.
initial settings
This process will set all the items to factory default settings.