Space Ray PTS Series Single Stage User Manual

Page 21

Advertising
background image

Form 43343330

-20-

Aug 2012

10.1)

ASSEMBLY OF EXTENSION SECTION

MIN 8’ MAX 10’ BETWEEN HANGERS

1

2

Tube Support/
Hanger Bracket

Wire Hanger

Coupling

U-Bolt Clamp
& 5/16” Hex Nuts

Tube Support/
Hanger Bracket

3

6” approx.

See typical assembly overview (Section 8.0) for typical complete assembly. Assemble additional extension
sections as required for all systems. (See Sections 7.0), and 8.0) for typical layout details.)

Join the tube sections together and secure with tube couplings as described below:

T

TT

The following

he following

he following

he following coupling

coupling

coupling

coupling tightening instructions MUST

tightening instructions MUST

tightening instructions MUST

tightening instructions MUST be

be

be

be

followed properly to ensure the integrity of the tube

followed properly to ensure the integrity of the tube

followed properly to ensure the integrity of the tube

followed properly to ensure the integrity of the tube
connections. Two #10 self

connections. Two #10 self

connections. Two #10 self

connections. Two #10 self----drilling screws

drilling screws

drilling screws

drilling screws MUST

MUST

MUST

MUST be installed

be installed

be installed

be installed

at every coupling as shown in the ins

at every coupling as shown in the ins

at every coupling as shown in the ins

at every coupling as shown in the instructions below. Failure

tructions below. Failure

tructions below. Failure

tructions below. Failure

to do so may result in serious injury or property damage.

to do so may result in serious injury or property damage.

to do so may result in serious injury or property damage.

to do so may result in serious injury or property damage.

1.

Place the compression coupling over the end of the tube.

2.

Use the small hole at the centerline of the coupling to check that the coupling is inserted correctly.

3.

Partially tighten the bolt nearest the end of the tube (approximately half closed).

Tube
Coupling

1

Center end of
Tube with hole

Partially tighten this bolt

Tube

2

3

Advertising
This manual is related to the following products: