Space Ray PTS Series Single Stage - Manual (Page 30)

Form 43343330
Aug 2012
-29-
ANGLE MOUNTED HEATERS ONLY ANGLE MOUNTED HEATERS ONLY ANGLE MOUNTED HEATERS ONLY ANGLE MOUNTED HEATERS ONLY
5. If heaters are to be angle mounted, the TISS wire holder clamp must first be re-positioned as shown using using using using
the bottom hole pattern the bottom hole pattern the bottom hole pattern the bottom hole pattern of the clamp. Follow procedures described earlier for all other adjustments.
Angle Mounted Body Section
Re-position wire clamp using
bottom hole pattern.
End View
Step 5
Failure to re-position the wire clamp at the bottom hole pattern
will shorten the life expectancy of the TISS wire assembly.