Tech Source Raptor Drivers for HP-UX - Manual (Page 28)

Raptor Drivers for HP-UX Installation and Reference Manual
5-2
5. Move the cursor down to
Remove (analysis)
and press
<
Enter
>.
6. When
the
Status
becomes
Ready
, press <
tab
> until
OK
is
highlighted, and press <
Enter
>.
7. A warning message will pop up. Read the warning, then
select
Yes
.
8. Another warning will pop up indicating that the kernel will be
rebuilt. This is necessary in order to remove the driver from
the system, so select
Yes
.
9. After several minutes, the status will again say
Ready
.
Press <
tab
> until
OK
is highlighted, then press <
Enter
>.
10. A warning message will pop up indicating that the system
will reboot when you press <
Enter
>. Press <
Enter
>.
When the system has rebooted, the Raptor Drivers for HP-
UX package will have been removed from the system.