Tech Source Raptor Drivers for HP-UX - Manual (Page 7)

1-1
Chapter 1
INTRODUCTION
1.1 Overview
Thank you for purchasing a Tech Source, Inc. Raptor graphics card
for use with your HP workstation/server. This manual describes the
installation of the Raptor graphics hardware and software on Hewlett
Packard workstations/servers (B, C & J class.) This software
comprises of device drivers for the following Raptor graphics cards.
•
Raptor 2000
•
Raptor 1100T
•
Raptor 2100T
•
Raptor 2500T-DL
All the Raptor graphics cards are supported under HP-UX 10.20 and
11.0. HP-UX 11i drivers are only available for Raptor 1100T, Raptor
2100T and Raptor 2500T-DL.
All systems vary somewhat, therefore some knowledge of the
features of your system and a basic understanding of HP-UX are
helpful during the software installation process.
From this point forward, Tech Source, Inc. will be referenced as Tech
Source or TSI and all Raptor models will be referred to as Raptor
cards.
The Raptor Drivers for HP-UX software is provided on a CD-ROM. It
consists of:
•
Tech Source Raptor device-drivers for HP-UX
•
X Windows loadable DDX for Raptor 2000
•
X Windows loadable DDX for Raptor 2100T, Raptor 1100T and
Raptor 2500T-DL