Tech Source Raptor Drivers for HP-UX - Manual (Page 5)

i
TABLE OF CONTENTS
INTRODUCTION 1-1
1.1 Overview 1-1
1.2 Conventions 1-2
HARDWARE INSTALLATION 2-1
2.1 Hardware Configurations Supported 2-1
2.2 Installation of All Raptor Graphics Cards 2-1
2.3 Installation of Raptor 2100/2500 FPS 2-2
SOFTWARE INSTALLATION 3-1
3.1 Requirements 3-1
3.2 CD-ROM Installation 3-1
3.2.1 Installation on HP-UX 10.20 3-2
3.2.2 Installation on HP-UX 11.0 3-3
3.2.3 Installation on HP-UX 11i 3-4
3.2.4 Mounting the CD-ROM Manually 3-5
3.3 New Devices 3-6
3.4 Changing Resolution on Raptor Cards 3-8
3.4.1 Changing Resolution on Raptor 2000 and
Raptor 2100T 3-8
3.4.2 Changing Resolution on Raptor 1100T 3-8
3.4.3 Changing Resolution on Raptor 2500T-DL 3-8
INVOKING X WINDOWS 4-1
4.1 Overview 4-1
4.2 Configuring X Windows 4-1
4.2.1 Single Screen Mode 4-1
4.2.2 Multi-Screen Mode 4-2
4.3 Setting Bit-Depth and Resolution 4-2
4.3.1 Setting Bit-Depth 4-2
4.3.1.1 Config File 4-3
4.3.1.2 STARSMODE Variable 4-3
4.3.2 Setting the Resolution 4-4
4.4 startx 4-5
4.5 xinit 4-5
4.6 Common Desktop Environment (CDE) 4-6